Icon Descriptions |
||
Drive Method |
||
 |
Hand-Operated |
Pressure for sealing (printing) is applied by hand. |
 |
Foot-Operated |
Pressure for sealing is applied by foot pedal. |
 |
Electric |
Pressure for sealing (printing) is applied electrically. |
 |
Electric Air Cylinder Drive |
Pressure for sealing is generated by compressed air from a compressor. |
Function |
||
 |
Seal Only |
Sealing function only. |
 |
Vacuum & Seal |
Removes air from the bag before sealing. |
 |
Vacuum & Gas Flush & Seal |
Removes air from the bag and flushes with inert gas before sealing. |
Control System |
||
 |
Equipped with Heating Temperature Control System |
Enables precise control of sealing temperature. This proprietary technology developed by Fuji Impulse is called ONPUL. |
Heating & Cooling Method |
||
 |
Equipped with Heat & Cool Indicator |
Hand-operated or foot-operated models equipped with a timer that indicates red during heating and blue during cooling. |
 |
Lower-Side Heating |
Heats from the lower side. |
 |
Lower-Side Heating Model Available |
Models with lower-side heating are available. |
 |
Upper-Side Heating |
Heats from the upper side. |
 |
Upper-Side Heating Model Available |
Models with upper-side heating are available. |
 |
Double-Side Heating |
Heats from both upper and lower sides. Ideal for thick films, laminated bags, and gusset bags. |
 |
Double-Side Heating Model Available |
Double-side heating models are available. Models ending in D or DK (e.g., -5D, -10DK) indicate double-side heating. |
Sealing Condition Settings & Storage & Logging |
||
 |
Adjusts Sealing Conditions via the Control Knob | Settings are retained after power OFF unless the knob position is changed. |
 |
Retains Sealing Conditions | Sealing conditions set on the control unit are retained after power OFF and restored upon power ON. |
 |
Stores Sealing Conditions in Internal Memory | Sealing conditions set on the control unit can be stored and registered (storable patterns vary by model) and recalled after restart. |
 |
Measured Sealing Data Can Be Transferred to a PC | Measured sealing data can be saved in internal memory and transferred to a PC via USB. |
|
||